Crockers Paint

100% Australian Krysler Paints since 1958. Made at Sefton for Australian Conditions.

BUY ONLINE AND SAVE WITH BIG DRUMS (you save $18.00 on this product) PAY THE AMOUNT SHOWN AS THE FINAL TOTAL AND WE WILL CREDIT YOU THE SHIPPING AMOUNT (if charged) IN STORE AT PICK UP. THANK YOU!

CHOOSE YOUR STORE CHOICE FOR PICK UP WHEN YOU ADD TO CART (from drop down)

TAKE A COPY OF YOUR INVOICE WITH YOU WHEN YOU PICK UP(check your inbox or junk folder)

MAKE YOUR CHOICE OF COLOUR IN STORE OR TYPE THE COLOUR NAME INTO THE WINDOW FOR DELIVERY INSTRUCTIONS AT CHECKOUT: small charges may apply

DO YOU NEED PAINT BRUSHES ETC? SEE THEM HERE

NB FOR OUR CUSTOMERS NOT CLOSE BY, WE CAN OFFER SHIPPING. Please email us for a quote.

KRYSLER 205 LOW SHEEN ACRYLIC

Krysler 205 Low Sheen Acrylic is a tough, hard wearing paint which dries quickly to an elegant finish for interior surfaces

 SURFACE PREPARATION

 Remove all grease, flaking paint and dust etc. Wash with sugar soap. Fill nail holes, cracks etc with suitable filler. Sand smooth and dust down. Paint these areas with Krysler Undercoat Wallboard Sealer. Finish with 1-2 coats of Krysler 205 Low Sheen Acrylic. Gloss or semi gloss surfaces must be sanded to a flat finish. Failure to thoroughly key glossy surfaces may result in early paint failure. Mould should be treated with a recommended Mould Wash.

NEW PLASTER, WALLBOARDS, FIBROUS PLASTER, FIBRO ETC

Brush down to remove dust. Apply 1 coat of Krysler Undercoat Wallboard Sealer

BRICK, FIBRO, CEMENT RENDER: Apply 2 coats Krysler 205 Low Sheen Acrylic.

FOR TIMBER, MASONITE AND HARD WALLBOARDS: Apply 1 coat of Krysler Wallboard Sealer Undercoat then finish with 2 coats Krysler Low Sheen Acrylic.

EXTERIOR TIMBER: 1 coat of wood primer is recommended.

 APPLICATION

Stir well with a flat stirrer. Do not use when temperature is below 10 degrees cels or late afternoon on cold damp days. Apply 1-2 coats as required of Krysler 205 Low Sheen (2 coats recommended). Normal recoat time is 2 hours; colder conditions 4 hours recommended.

 CLEAN UP

Clean equipment in water immediately after use.

 CARE OF NEW PAINT WORK

 Avoid exposure to steam and condensation for 48 hours after painting. Wash lightly only after 7 days by wiping with wet sponge and mild detergent. Always avoid abrasive cleaners.

Provide adequate ventilation during use. Not recommended for surfaces used for collection of drinking water.

 DRYING: 30 MINS

RECOAT; 2 HRS

APPLY: BRUSH OR ROLLER OR SPRAY

CLEANUP: WATER

COVERAGE: 10-14 SQ MT PER LITRE PER COAT